PDA

View Full Version : How do I make cable hook-up work tv's


jtking
07-27-2010, 12:04 PM
Recently purchased 2008 Tour Master 40A. Can't figure out how to make input from outside cable TV connection work on TV's. Any help would be appreciated.
Thanks,
John..

tarheel
07-27-2010, 12:13 PM
John-
I had the same problem recently with my 07 that I had just purchased new. I connected it to the receptacle in my eletrical department marked TV cable.. Couldn't get anything. Had the park working on the issue also. Finally someone asked what type of receptacle the one behind a covered box was. I said I didn't know, so we opened the cover, attached it to the one in the covered box and everything worked great. I guess someone at the factory did some mislabeling on mine.

jtking
07-27-2010, 12:19 PM
Thanks. I'll take a look at that.
John......

Timothy
07-27-2010, 03:52 PM
Also make sure your antenna booster is off. Cable won't work if it's on.

jtking
07-27-2010, 04:08 PM
Mission accomplished!!! Thanks to all. The outside connections were mislabeled.

John......

coolchas11
07-29-2010, 08:50 PM
Appears to be standard mislabeling. We had the same problem!