PDA

View Full Version : Overhead lighting problem


Roaddog41
08-30-2014, 12:02 PM
I have a 2006 Friendship 7 that recently had a bedroom slideout problem that was repaired. I now have a problem with the light in the half bath and the hall light in front of the shower. The plug in the half bath works, I made sure the wall and light unit switches were all on and have checked breakers and fuses but am unable to discover the problem. Does anyone know where the solution may lie? Thanks

howermj
08-30-2014, 12:44 PM
If it's your overhead lights, it is a 12v issue. If you have a multimeter, start at the fixture and work your way toward the fuse panel, checking for continuity all the way. I had a similar problem with the reading lights on the wall of the bedroom slide. Turned out to be a broken wire that the techs pinched when they were reinstalling the slide. Took me hours to find, 5 minutes to fix.

Roaddog41
08-30-2014, 12:59 PM
You are correct, there is no power to the fixtures so I will try to find the wires that lead to them. Thanks

Roaddog41
10-06-2014, 08:09 PM
Previously I asked for help with overhead lighting in the bath and toilet area. I have tried to follow the lines but a wiring diagram would be useful. Does anyone have a wiring diagram for a Friendship 7 2006? I tried following the wires but there are a lot of wires. Any help would be appreciated. [email protected]
Thanks!

RayChez1
10-07-2014, 06:04 PM
Since it is a twelve volt problem, have you checked right at the fuse to see if you have power there. Circuit breakers are for your AC power, fuses for your DC power.