PDA

View Full Version : generac np50G wiring


camtrans
03-10-2018, 06:03 PM
Hello All : New member here so will apologize ahead of time !
I have a 2000 Gulfstream Conquest Supreme with a Generac NP50G Generator , while traveling the wiring for the interior start was tore out of the 4 pin plug on generator backside .I have 4 wires (green , red , yellow , and brown) I am in need of a picture for this plug to be rewired . Ive checked the generac manual and obviously no color codes of mine . Please assist fellow gulf streamers since generac and gulfstream are not too helpful. Ive located a different wiring schematic showing (white brown yellow and green but I don't wanna end up destroying a board or generator or motorhome .

plug picture wiring from bottom to top (0-17-14-18) hoping to find out the color of the wires to go where ?

DanKearney
03-10-2018, 06:46 PM
Hopefully one of these might .

https://www.manualslib.com/manual/60567/Generac-Power-Systems-Np-40g-Series.htmlhttps://www.manualslib.com/manual/60567/Generac-Power-Systems-Np-40g-Series.html

https://www.manualslib.com/products/Generac-Power-Systems-Np-50g-Series-4685398.html

http://www.bdub.net/manuals/Generac_IM-NP-Q.pdf

Cheers,

Dan K.

camtrans
03-10-2018, 07:21 PM
Thank you Dan , the manuals helped to a point . there showing different color wiring for the four prong remote plug . will have to get the ole voltmeter out and hope for the best .