View Single Post
Old 06-18-2017, 10:35 PM   #6
AmeriLite21
Member
 
Join Date: Sep 2007
Posts: 33
Default

The valve on the tank had a short length of clear plastic hose attached that dropped through a hole in the floor to drain the tank. I attached an plastic elbow with a hose connect to the hose just under the floor. I glued a short length of 1/2 inch plastic pipe ( about 2 feet long to reach the outside bottom edge of the trailer) to the elbow. I attached a plastic hose bib to the end of the plastic pipe. I secured the pipe to the bottom of the trim along the bottom of the trailer with a pipe clamp. I keep the valve on the water tank open. To drain the tank I just open the hose bib on the outer edge of the trailer. I hope that explains it. Sorry it took so long to respond.
__________________
Mike and Sharon
Polly (Mini-Peke), Sigmund(Mini-WireHair Dach)
'07 Ameri-Lite 21MBLE
'01 Dodge RAM 1500 4X4 O/R Quad Cab SLT
AmeriLite21 is offline   Reply With Quote