Gulf Stream Owners RV Forum - View Single Post

SHADYR · 07-28-2014, 09:45 PM

Dennis---thought I would update you on my slideout no-power problem. I had 2 issues, which thanks to your input, I was able to resolve. First, the 12V power switch (located on the inside wall of the entry steps) must be "on" for the A/C to work with the Generator on. Second, the vehicle engine was running when I tried to move the slides---this is a no-no, as there is an automatic cut-off that prevents the slides from operating when the ignition switch is in the "on" position (as it would be with the engine running!). I still need to try the refrigerator, water heater, and furnace to thoroughly shake down all the operational functions of the unit. Will let you know if there is a problem!!>
Thanks again..
R Shady

07-28-2014, 09:45 PM	#4
SHADYR Junior Member Join Date: Jul 2014 Posts: 6	Re: No power to the A/C or Slideouts Dennis---thought I would update you on my slideout no-power problem. I had 2 issues, which thanks to your input, I was able to resolve. First, the 12V power switch (located on the inside wall of the entry steps) must be "on" for the A/C to work with the Generator on. Second, the vehicle engine was running when I tried to move the slides---this is a no-no, as there is an automatic cut-off that prevents the slides from operating when the ignition switch is in the "on" position (as it would be with the engine running!). I still need to try the refrigerator, water heater, and furnace to thoroughly shake down all the operational functions of the unit. Will let you know if there is a problem!!> Thanks again.. R Shady