Just removed front tv on 2002 8329 Sun Voyager.
All screws are Robertson's aka square heads.
6 screws on front trim ring. Remove plastic buttons and the silicone plugs with a knife. Unscrew trim ring and use knife to slowly separate trim panel from enclosure box.
Piece of 2x2 with 2 screws holding in tv at top, remove.
Rear of tv there is what I would call a kick panel covering up av cords, etc. 3 screws holding it in. Remove, will need a stubby Robertson's screw driver.
Unplug everything.
The tv is now loose with only a safety strap. Mine was attached to the back of the tv with 3M tape or something similar. Used knife to pry it off. Otherwise I would have just cut it.
TV can now be removed. It took me all of twenty minutes. Hardest part was removing the silicone from the 6 screw holes on the trim ring.
|