[riverofcode]

As a follow up to this post... I picked up a "BR" type Cutler Hammer breaker with dual 20 amp breakers in one. Swapped out the middle A/C unit breaker and put it in its place. The 2nd circuit was for a direct line over to the desk on the slide. I removed the old 14 gauge wire and replaced it with #12 romex and ran #10 rubber coated thru the slide arm where I removed the #14 rubber wire. I didn't want my workstation outlets on the inverter circuit since the wife wanted a "fireplace" plugged in there and would only use it if on shore power anyway. I just need to neaten up the romex in the basement now. I am also swapping out all the RV type duplex outlets for real residential outlets. Those smash together insulation displacement outlets scare me.