Gulf Stream Owners RV Forum - View Single Post

Banjo · 09-24-2018, 08:23 PM

Thanks for the suggestion. I actually finished the installation of the ShurFlo 4008 pump today. I decided to use a 12" X 20.5 " plywood (3/4") as a base and fastened it to the framing wood. I put felt on the bottom of the plywood and inserted a 4"X6" rubber gasket under the pump. Installed the ShurFlo pump on the wood, added silencing kit, added snap connectors to the power, and now have a whisper quiet pump. It can also run when the tank is dry!

09-24-2018, 08:23 PM	#3
Banjo New Member Join Date: Sep 2018 Posts: 2	Thanks for the suggestion. I actually finished the installation of the ShurFlo 4008 pump today. I decided to use a 12" X 20.5 " plywood (3/4") as a base and fastened it to the framing wood. I put felt on the bottom of the plywood and inserted a 4"X6" rubber gasket under the pump. Installed the ShurFlo pump on the wood, added silencing kit, added snap connectors to the power, and now have a whisper quiet pump. It can also run when the tank is dry!