View Single Post
Old 09-20-2017, 08:27 AM   #4
Chuck v
Senior Member
 
Join Date: Dec 2009
Posts: 1,027
Default

Yes, that is the same location as the original TV in my coach, but the curved panels were not used in the Tour Master. They did use that incredibly cheap and feature poor Jensen flat screen that does not support HDMI of any over the air HD tuning, etc.

The TV is just a friction fit to the cavity, and it looks like you need to ease the bottom out first and drop it down a bit to clear the upper cabinet frame. You will not find a contemporary flat screen HD or UHD TV that is exactly that shape and size, so you will most likely "float" a thin and slightly larger unit in front of the opening as I did on my second replacement -- just used a wall mount from the rear of the cavity.

When you replace the old Jensen be sure to pull the needed HDMI cables, audio and any other connections you need between that cavity and the electronics cabinet to the left.

Good luck and post pictures of your progress and final solution.

Chuck
__________________
2007 Tour Master T40C
Acura MDX toad

"It takes a great deal of time to recover from any improvement..."
Chuck v is offline   Reply With Quote