View Single Post
Old 07-26-2018, 11:20 PM   #2
jayme
New Member
 
Join Date: Jan 2011
Location: B.C. Canada
Posts: 27
Default

Hi there. I also have an 05 cruiser. My winter prep consists of draining tanks and hot water tank, removing the anode and flushing the tank out. I then, with my compressor, blow all remaining water out of the lines. On startup in the spring, I fill the water tank, turn the pump on and pressurize the system, filling hot water tank.on your control panel, left side is the switch to turn the heater on. If it doesn’t light, a red light showing pilot not lit. Turn switch on until you can hear the heater operating. Hope this helps.
jayme is offline   Reply With Quote