View Single Post
Old 09-20-2018, 08:05 AM   #10
heetseeker
New Member
 
Join Date: Aug 2018
Posts: 29
Default

Switch was identified. Floor courtesy lights. After I pulled the wires and put a meter on them, they (2 of lights) were operated by 2 switches in a double pole config. Like on a long hallway that controls the lights at both ends. I replaced the burned out bulbs with a new marine LED model with sealed housing and they work great. Not a lot of light but nice at night. Now to find a motion detector to wire in and we are set. Thanks for the help on that switch I.D.
heetseeker is offline   Reply With Quote