View Single Post
Old 05-30-2018, 06:35 AM   #9
Steveg
New Member
 
Join Date: Apr 2018
Location: Ashland
Posts: 18
Default

Hi. I don’t see how your water tank can fill while being hooked to city water. Let me know what you find. Regarding the leaking light: I started by the process of elimination. The caulking along the sides looked unbroken, so I reasoned that the light might be the source. When I pulled it off, it was obvious that water was still in the light fixture, showing that the caulking at the top of the light was bad, while the bottom of the light was good. This simply made the light fill up to the level where the hole is drilled for the wire. So I put caulking under the light, then went 360 degrees around caulking the edge where plastic meets siding. Since then I re-caulked every light. I noticed some of the light covers were poorly made and did not fit tightly. I put a dab of silicone on each side to hold the covers on. Otherwise, they would have blown off, as one did as we pulled out of the lot when we were buying it new. Hope this helps.
Steveg is offline   Reply With Quote