View Single Post
Old 11-11-2017, 08:02 PM   #1
Trnelson
New Member
 
Join Date: Nov 2017
Location: Burlington
Posts: 10
Default Generator not supplying juice, Conquest 6320

Hello all:

New to this, but having lots of fun.

Recently purchased a Conquest 6320 and have taken it out to a few spots in Wisconsin, all with shore power.

The other day, started up the genny (Cummins), but despite the genny running, the coach had no power. Used a voltmeter to check AC outlets - nothing.

When shore power is connected, coach is powered and everything works as expected.

I'm a little frustrated with the lack of documentation provided by Gulfstream, but this forum has been quite helpful.

However, it also seems that everyone's coach is a little different.

My questions for everyone out there:

1. Where is the on-board breaker on the Cummins generator (I assume there is one, right?)?
2. Where is the automatic transfer switch? (there is a panel under the fridge, but it looks like a fuse/breaker panel and not the ATS). I was able to trace a line from the area where shore power is connected, which is behind a dresser drawer, but the line then goes through a wall. There is no ATS-looking box under the bed, under sink area in bathroom, or under sink in kitchen. Also, there is no hardware mounted within any of the storage bays.

Very frustrating, especially considering this thing is brand new.

Do any Conquest owners out there have any advice?

Thanks,
Todd
Trnelson is offline   Reply With Quote