View Single Post
Old 02-07-2019, 04:11 PM   #2
Sudsy
Senior Member
 
Sudsy's Avatar
 
Join Date: Mar 2017
Location: Mechanicsville, Md.
Posts: 487
Default If it's like mine.

On my 2005 Sun Voyager with two slide rooms that are hydraulic and a third that is electric the manual says to make sure all the rooms are in. Make sure all the jacks are up. My jacks use the same pump as the slide room. If it's stopping even though you are still holding the switch then it is hitting its limit for heat or pressure. I would lubricate the slides under the room, check to make sure all of the rollers that carry the slide room are clear and intact. I use the specific fluid that came with the unit but you can use ATF but if I did that I would drain and refill with all ATF. I don't like mixing fluids. My system is made by Dewald (not Dewalt).


Sudsy
__________________
2005 Sun Voyager Workhorse W24 with 8.1 ltr Chevy. Allison 2100 transmission. Full body paint.
Sudsy is offline   Reply With Quote