This is not an easy issue. If you have a hydraulic repair shop, old school type preferred, you might have a chance. Pull the cylinder, give it to them to fix. They can size things up with stuff they have.
You can try it yourself, if you figure nothing to lose, and you'll buy a new cylinder if necessary. Go to LCI1.com and look at "support," "documentation" . . . You (hopefully) will find .pdf type service manuals you can download with specs listed. Not all inclusive, but you might get lucky. If/when you pull the cylinder apart, the seal might have numbers stamped in the ring, and again, you might get lucky. BTW, a double acting cylinder does not usually drop with one leaking seal, might be a manifold valve problem (plus a leak). OK, time for another cup of coffee . . . Maybe this helps.
|