Not much new since I made a post in Sept, 2019. I got mine working again but it may not last very long. It is in storage now and used very little last year. As I recall there is a metal bar across the base of the bulb mountings and it can be removed by removing a couple of screws. I have even resorted to placing small cable ties/tie wraps to help hold things in place. I have never removed the whole lens assembly and I can see that it is secured in very poorly with these long skinny bolts about 1/8 " in diameter and the nut is threaded way down on the bolt. Would probably need to cut the bolt to remove the lens. My bulbs have never failed/burned out. It has always been poor connections at the base of the bulb. I wish GS offered a complete new assembly with LED bulbs. I would like to know if anyone has a good fix for these. My email address is
[email protected]
Fitz