I agree with Dolce.
I took out the couch in our MH and had 50" to work with. We found 2 Lay-Z-Boy recliners with right and left handles but without center armrests that just fit with an inch between them. The slide floor was not deep enough with the chairs in the reclined position. I bought a 5/8" sheet of plywood cut to the correct width and depth to extend the floor by about 6 inches. I used heavy screws to attach the plywood to the existing floor, then drilled and screwed the chairs to the floor. To prevent the chairs from moving I screwed a block of wood behind wooden base.
These chairs were not cheap but worth the cost. We're very happy with the change.
|