View Single Post
Old 08-21-2018, 08:19 PM   #27
riverofcode
Member
 
Join Date: Jun 2017
Location: Fredericksburg
Posts: 53
Default

Chuck,

We removed the doors from both the one we were taking out and the one we were installing. (https://www.lowes.com/pd/Whirlpool-2...TAR/1000432083)

I removed the forward window on the slide above the sofa. I hopefully attached an image of the side. That is not the location I did the work but don't have a picture of when we did it. The window is about 6 1/2 feet above grade once you get it leveled to extend the slide. There is a lot of room in the front salon area and plenty of headroom to stand the fridge back up in the middle of the floor.

We protected the floors I replaced recently using 1/4" luan plywood.

We removed the sofa and have replaced it with a chair so that was gone. We set this (https://www.walmart.com/ip/BLACK-DEC...WM425/21272991) on the slide about 2 feet from the window.

Slide was in the extended position. We placed both units on their backs to move them. I parked the coach so I had lots of room in the driveway next to the slide area. My friend lifted the fridge up next to the coach just above the window bottom height. To protect the window hole bottom I cut a rectangular plastic downspout to length and cut one side off to slip over the bottom of the opening. That protected the wall from dragging the fridge across it. We kept the tractor and forks around 2-3 feet from the side so no fear of hitting the coach walls.

This sounds way more complicated that it actually was.
Attached Images
File Type: jpg t40c_side.jpg (457.9 KB, 5 views)
__________________
--
Scott

2008 Tour Master T40c
2014 Honda CRV toad
riverofcode is offline   Reply With Quote