View Single Post
Old 08-13-2019, 06:41 AM   #15
BT5210
Member
 
Join Date: Aug 2019
Posts: 52
Default

tire pressure's...
there is only one way to proper set tire pressures,..you can use the factory sticker, or the info on the side wall of the tire to get a base....you have to load the coach as you would normal,.. and go weight it...you have to have axel weights, front and back..easy to do at any truck stop...there are all kinds of tests to do,... chalk tests and such....but a trained eye works...most all truck tires have an inflation table... add about 10%/20% to weight to get proper inflation..over inflation will wear out the center of the tire, and under will break down the side walls, over heat tire, and wear out the outer edge..

if you are getting tire walk, make sure you run about 1000 miles...tires have to take a set when new..and some times require a little more air...
BT5210 is offline   Reply With Quote