Quote:
Originally Posted by bsonterre
I have a 2008 Gulf Stream Class A model 8330 independence. My problems with the slide out started after having the hydraulic ram replaced. Problems are now it wants to creep out after retracting it in. It creeps out about 3 inches.
Problem 2 when the slid out is retracted the top makes contract first and then the bottom travels about 2 more inch's before the bottom seals. I have notes that there is no free travel on the end of the ram where it is connected to the wall. install guide line states there should be 2-3 inch's of free travel. Will this also cause my problems? Shop cant find problem!
|
On a hydraulic slide out there are two valves, one for IN and one for OUT. Your IN valve is the problem. Or it's the ram bypassing, bad seal.