|
|
12-24-2018, 07:10 PM
|
#21
|
New Member
Join Date: Dec 2018
Location: St Johns
Posts: 20
|
Well I am finding that out the wife wants to go home already but I say no way not yet it's Florida or broke. Next adventure coming soon.
Ron & Barb
Gulfstream Friendship G7 2005
|
|
|
12-24-2018, 07:46 PM
|
#22
|
Senior Member
Join Date: Nov 2012
Posts: 281
|
Did you bypass the inverter? When mine went out I just bypassed, while unplugged, remove bother sets of wires going to and coming from the inverter and hook them together, should be color to color,
__________________
Mike & Becky
2005 Crescendo 8356
|
|
|
12-28-2018, 05:06 AM
|
#23
|
Member
Join Date: Jul 2018
Location: Panama City Beach
Posts: 67
|
Quote:
Originally Posted by Frutza
Did you bypass the inverter? When mine went out I just bypassed, while unplugged, remove bother sets of wires going to and coming from the inverter and hook them together, should be color to color,
|
Exactly how mine is. I didn't have an inverter when we got it and I don't miss it at all.
__________________
2006 Gulf Stream Crescendo 8356 First Timers!
|
|
|
12-30-2018, 12:43 PM
|
#24
|
New Member
Join Date: Aug 2018
Posts: 9
|
I'm no electrician but........
The 120v MH wiring is the same as your house wiring. The power comes into your main breaker which allows the current to flow down through the buss bar to the breakers. From the breakers the black wire goes to the outlet/switch and back to the breaker panel to a terminal strip marked "Common"
I have a 2005 Ultrasupreme Class A and is wired with roadside plugs, curbside plugs, microwave, AC, and ground fault. Yours is probably the same.
My problem started last year at this time when I couldn't get my air conditioner switch to work. After testing with a multi-meter I discovered I had a bad connection at the common. When I took the cover off the breaker panel, the last 4" of all the common wires were burnt to a crisp and the stranded wire turned to dust. I went through and spliced in new wires and that solved my problem.
So, 3 weeks ago I lost my microwave. I used an extension cord from a working plug to test it and the microwave worked. So it was back to the breaker panel. Again all the wires were burnt. When I spliced them the last time I used Marretts. The packaging said they were good to 221F and the microwave Marrett had a hole burnt in it! I replaced the wire and the microwave is good again. About a week later I lost all my roadside plugs. Back to the breaker panel and I had to splice in a new piece of wire.
Long story short, here it is Dec 30 2018 and I'm Las Vegas. My son the electrician is flying in today and will bring some of his testing equipment with him. I have a problem with the common connection that needs to be resolved. It is beyond my area of knowledge and I don't have the testing equipment to trace the problem. I will have to resplice all the wires once I find out what my problem is.
So Scrooge517, look in your breaker panel (turn off the power first) and make sure your common wires are good. Make sure the connections at the terminal strip are tight. If they are loose, your plugs will not work.
|
|
|
12-31-2018, 07:23 PM
|
#25
|
New Member
Join Date: May 2017
Posts: 14
|
Bad breaker
Being an electrician for over 30 years, I would bet it is a bad breaker, it may not looked tripped but still be bad. If you have a meter, and are not shy about working around live power, you need to take off your panel covers and check each breaker where the wire terminates under the screw, I would bet you would find one without power. Just my humble opinion.
If you have an inverter, you should have two panels.
|
|
|
01-01-2019, 05:25 AM
|
#26
|
Senior Member
Join Date: Apr 2018
Location: Nebraska
Posts: 557
|
Quote:
Originally Posted by bmoj
I'm no electrician but........
The 120v MH wiring is the same as your house wiring. The power comes into your main breaker which allows the current to flow down through the buss bar to the breakers. From the breakers the black wire goes to the outlet/switch and back to the breaker panel to a terminal strip marked "Common"
I have a 2005 Ultrasupreme Class A and is wired with roadside plugs, curbside plugs, microwave, AC, and ground fault. Yours is probably the same.
My problem started last year at this time when I couldn't get my air conditioner switch to work. After testing with a multi-meter I discovered I had a bad connection at the common. When I took the cover off the breaker panel, the last 4" of all the common wires were burnt to a crisp and the stranded wire turned to dust. I went through and spliced in new wires and that solved my problem.
So, 3 weeks ago I lost my microwave. I used an extension cord from a working plug to test it and the microwave worked. So it was back to the breaker panel. Again all the wires were burnt. When I spliced them the last time I used Marretts. The packaging said they were good to 221F and the microwave Marrett had a hole burnt in it! I replaced the wire and the microwave is good again. About a week later I lost all my roadside plugs. Back to the breaker panel and I had to splice in a new piece of wire.
Long story short, here it is Dec 30 2018 and I'm Las Vegas. My son the electrician is flying in today and will bring some of his testing equipment with him. I have a problem with the common connection that needs to be resolved. It is beyond my area of knowledge and I don't have the testing equipment to trace the problem. I will have to resplice all the wires once I find out what my problem is.
So Scrooge517, look in your breaker panel (turn off the power first) and make sure your common wires are good. Make sure the connections at the terminal strip are tight. If they are loose, your plugs will not work.
|
Seems like it was a bad connection causing arcing in the first place. The heat and arcing could have made the common bar distorted and corroded. Then, because of the damage, you have more than one connection bad with a lot more heat and arcing. If you can't replace the burnt common bar, a whole new breaker box may be needed. That's my guess without seeing it.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|