Since it’s on a Ford V10 chassis, they’re probably disc brakes. I would just go to NAPA etc and get their Severe Duty pads, I’d also replace the brake hoses front and rear. The hoses are notorious for collapsing on the inside and causing problems. If you’re doing it yourself won’t hurt to pull the wheels off and see what the calipers look like and the brake pads. You may need calipers if any of them are frozen. Since replacing the brake lines, and maybe the calipers it’s also a good time to do a flush. There’s plenty of videos on YouTube to show you how to you flush/bleed your brakes. You can also buy brake bleeders that you screw in to the caliper and allows you to do it yourself.
__________________
John
The sheep always complain about the Sheepdogs UNTIL the Wolves show up then they beg for help!
|