Backup Camera for 2006 BT cruiser

[Joe Taylor]

I just purchased a wireless backup camera for my MH, it had a beep-beep system but no camera. I hooked it up to the existing wiring and the camera works great. I really want to have the backup camera work while I'm driving; I don't know where to wire into the rear of the MH to have electricity while I'm going down the road. Help???????? I'm not an electrician so don't make it complicated. Thanks

[Bren]

Hello, here is a Facebook page dedicated to the BT Cruiser I thought you might be interested in.

https://www.facebook.com/groups/8018...245/?ref=share

[THenne1713]

I wired mine, a Birdseye mount, into clearance lights, and I drive with lights ON, which turns Camera ON. If mounted HIGH, mount UNDER clearance lights***, or reflection/ glare can be an issue at night. ALSO EASIER TO REACH/CLEAN Lens while standing on bumper, and you WILL need to CLEAN AFTER EVERY RAIN/ FOGGY MORNINGS, ETC, or you just get white screen. Bring wire out from under bottom of light, LOOP under camera and go back up to camera and enter below; the Loop acts as a water DRIP POINT.