Gulf Stream Owners RV Forum
 


Notices

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-12-2019, 10:59 AM   #1
Anaya
New Member
 
Join Date: Jun 2019
Posts: 3
Default Walls/construction/studs

Hi, First time poster here!
I have a 2002 Gulfstream Ultra and have removed the original table. I want to put in a different table which would require fastening it a few inches further over and slightly higher. Does anyone know (a) a good method for finding studs, or (b) can you describe where they might be (under a window for example), or (c) what they are made of - wood or aluminum? Really, ANY shreds of information regarding wall construction would be helpful, or any stories of how you have fastened things to your walls.


I've even thought of screwing a piece of plywood through the original screw holes and then attaching the table to that, but am not sure if that will work.



Thanks so much!
Anaya is offline   Reply With Quote
Old 06-13-2019, 12:07 PM   #2
Sudsy
Senior Member
 
Sudsy's Avatar
 
Join Date: Mar 2017
Location: Mechanicsville, Md.
Posts: 345
Default

The studs are aluminum. I would suggest getting a piece of aluminum a few inches wide and a length that covers the area you need and fasten it to the wall using fasteners (screws) at the studs. Then you can put new screws anywhere on the plate. It doesn't need to be very thick. Maybe like 16 Ga.



Sudsy
__________________
2005 Sun Voyager Workhorse W24 with 8.1 ltr Chevy. Allison 2100 transmission. Full body paint.
Sudsy is online now   Reply With Quote
Old 06-13-2019, 12:27 PM   #3
Anaya
New Member
 
Join Date: Jun 2019
Posts: 3
Default

Great idea to use aluminum. But how do I find the studs in the wall?
Anaya is offline   Reply With Quote
Old 06-13-2019, 12:31 PM   #4
Sudsy
Senior Member
 
Sudsy's Avatar
 
Join Date: Mar 2017
Location: Mechanicsville, Md.
Posts: 345
Default

Well I thought you had a table fastened there. Knock on the wall and listen / feel for solid vs hollow sounds. Use a very small drill bit and probe the area to find the metal. The area will be covered by the plate .


Sudsy
__________________
2005 Sun Voyager Workhorse W24 with 8.1 ltr Chevy. Allison 2100 transmission. Full body paint.
Sudsy is online now   Reply With Quote
Old 06-13-2019, 04:51 PM   #5
Anaya
New Member
 
Join Date: Jun 2019
Posts: 3
Default

I guess I should have explained it better. Right now the holes from the original table are about 10" lower than where the new table would need to be mounted, and about 15" too far to the left.
Are the studs generally vertical (like in a house) or horizontal?

And, is it safe to assume there is a strut running horizontal under the window, and also vertical ones coming down from each corner of the window?
Anaya is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 12:13 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.