You can pull the instrument cluster and unplug the chime. It’s really easy.
Pop the trim piece off around the cluster. Then there are 4 torx fasteners, T20 if I remember right. Pull the cluster away from the dash. On the drivers side of the cluster towards the bottom (directly behind the trans temp gauge basically) you will see a little round chime. If you put your finger over it it will silence it. Right next to it is a black connector. Use a flat screwdriver or knife or something to gently unplug that connector. It doesn’t plug in straight back, you have to slide it down.
It only takes about 5 min to do.
Jeff
|