Splash Guard

[Restorium]

I'm doing some body work and painting from the belt line down.
The old splash guard grass skirt has got to go. It's ugly!
What's everyone using these days?
I have muds flaps.
Do I even need a splash guard?

[Restorium]

Anyone know where I can get one that says GULFSTREAM on it?

[Restorium]

No comments....
OK
The grass skirt is gone and she's looking very 'plain' back there now. Needs something.
Some 'bling'.
I'm thinking a custom bumper would do the trick. Make the tail look finished and hide the hitch support.
Looks like I'm in uncharted territory.
Will provide pictures after paint.

[Chuck v]

Restorium,


My coach had a "Tour Master" rear mud flap but I have not seen one that says Gulfstream...however, you can have one made at this vendor:


https://duraflap.com/truck-model/rv/


Chuck

[Restorium]

Originally Posted by Chuck v

Restorium,


My coach had a "Tour Master" rear mud flap but I have not seen one that says Gulfstream...however, you can have one made at this vendor:


https://duraflap.com/truck-model/rv/


Chuck

Looks like they have it covered. Thanks for the link.

I see they are loyal Oregon State fans. The BEAVER flap is the best deal, Oregon State mascot.

Here's a picture of where I'm at on the project. I think the back end is just crying out for a custom bumper. It's like they left it not done when they designed it. And the front might need one too. I think it would look tough with one on the front plus it would protect that fragile fiberglass. It's a miracle I haven't cracked the front or the back yet. The construction barrels are impossible to miss with the back end pivoting around. I replaced both back side panels and the bottom trim plus added a lot of aluminum extrusion to make those areas super solid. I still have about 40 hours of sanding to do before it's ready for paint.

[Sudsy]

This is what the Gulf Stream one's look like. Maybe the supplier can use the picture as a pattern.


Sudsy

[Restorium]

Originally Posted by Sudsy

This is what the Gulf Stream one's look like. Maybe the supplier can use the picture as a pattern.


Sudsy

That's the one!

Looks like you need a custom bumper too?

[Sudsy]

Originally Posted by Restorium

That's the one!

Looks like you need a custom bumper too?

Your Tail Cap is the same as mine.



Sudsy

[Restorium]

Originally Posted by Sudsy

This is what the Gulf Stream one's look like. Maybe the supplier can use the picture as a pattern.


Sudsy

Sudsy,
How wide is the metal part of the splash guard? How thick is it? Thanks

[Sudsy]

I am bringing the coach home today from the refrigerator job. I'll try to remember to measure the metal part when I get that done.



Sudsy

[Sudsy]

Originally Posted by Restorium

Sudsy,
How wide is the metal part of the splash guard? How thick is it? Thanks

It's 96" wide. O would say 16 ga. Stainless.



Sudsy

[Restorium]

Paint work is done. Decided on the grass skirt splash guard for aerodynamics and less weight.