|
07-08-2011, 08:21 PM
|
#1
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Water Heater questions
I posted this in the FEMA section as well, but then I realized this may go better in the plumbing section.
I'm new to the forums, I just picked up a 2006 Gulfstream Caviler that was a unused Fema Trailer. I've set it up for permanant use on a lot near Summersville WV. I've got the water and sewer hooked up, and they will be installing power to my lot some time in the next week or so.
The questions I have are about the water heater, I would prefer to run the heater by electric only if possible (no propane), how can I tell if my WH is capable of this? and if it is, what do I have to do to run it in electric only mode?
The WH is a Atwood 10 gallon unit, here are a few pics
and just for fun, here are a few pics towing the camper up, and then sitting on my lot.
|
|
|
07-08-2011, 10:42 PM
|
#2
|
Junior Member
Join Date: Jun 2011
Posts: 16
|
Re: Water Heater questions
Sorry to say yours is a propane only unit. If it was electric there would be a power cord coming into a rod where the drain plug is The good news is you can buy a kit to convert it to electric the kit is called HOTT ROD they sell them on Ebay.
__________________
1996 Conquest Ultra 102 31feet since April 2011
1984 Southwind by Fleetwood 27 feet 2004
|
|
|
07-08-2011, 10:51 PM
|
#3
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Re: Water Heater questions
I can live with that, thanks. This "hott rod" kit, does it screw into the hole for the anode rod? The anode rod was laying loose in the compartment, but the threads had rusted off, so if this kit replaces the anode rod, I'll get the electric kit instead.
|
|
|
07-09-2011, 01:37 AM
|
#4
|
Junior Member
Join Date: Jun 2011
Posts: 16
|
Re: Water Heater questions
I beleive it goes in place of the drain but I have been known to be wrong someimes
__________________
1996 Conquest Ultra 102 31feet since April 2011
1984 Southwind by Fleetwood 27 feet 2004
|
|
|
07-09-2011, 12:57 PM
|
#5
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Re: Water Heater questions
from what I can tell from reading around the net, the drain plug is the same hole where the anode rod would go, I think. The only hole that I've found is under the gas chamber. A anode rod was laying loose in the compartment, as was a plastic plug, since the rod was rusted up, I just stuck the plastic plug in there, it didn't leak, so I'm guessing thats the right one lol.
|
|
|
07-09-2011, 09:04 PM
|
#6
|
Senior Member
Join Date: Jun 2005
Posts: 393
|
Re: Water Heater questions
your atwood heater shouldn't need an anode rod, it has an aluminum tank, the anode rod could fuse due to the disimaler metals. In atwood heaters the electical element is at the back of the heater not the front. Factory installed elements do not go in the drain hole.
__________________
Tim
|
|
|
07-09-2011, 10:50 PM
|
#7
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Re: Water Heater questions
Quote:
Originally Posted by Timothy
your atwood heater shouldn't need an anode rod, it has an aluminum tank, the anode rod could fuse due to the disimaler metals. In atwood heaters the electical element is at the back of the heater not the front. Factory installed elements do not go in the drain hole.
|
I've read this as well, the anode rod was just laying in the compartment, I'm not sure if it had ever been installed, the rod looks unused, but left in the elements, so I'm not sure where it came from. I will not be putting a new rod in.
With that said, since you mentioned the factory element was in the back, is there a chance my unit has the electrical element? how do I tell
|
|
|
07-13-2011, 07:04 PM
|
#8
|
Senior Member
Join Date: Jun 2005
Posts: 393
|
Re: Water Heater questions
You can look at the back and see if there is a romex wire going to the heater if not it is gas only. It there is the switch may be on the back of the heater. On the last Atwood I had, keep in mind this was a 1994 trailer thats the way it was. It was a little black toggle switch. There should also be a circuit breaker in your electrical panel for the water heater, and there may also be a switch somewhere inside the trailer.
__________________
Tim
|
|
|
07-14-2011, 03:44 PM
|
#9
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Re: Water Heater questions
great, Thanks! The camper is parked on my lot 2 hours away, and I'm still waiting on the power company to hook it up, so it's difficult not being able to just walk outside and take a look to see what I have. I'm gonna try to run up there next week and check it all out.
|
|
|
07-14-2011, 09:46 PM
|
#10
|
Senior Member
Join Date: Jun 2005
Posts: 393
|
Re: Water Heater questions
Okay, keep us posted on what you find.
__________________
Tim
|
|
|
08-06-2011, 12:42 AM
|
#11
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Re: Water Heater questions
my unit is definately propane only. It lit off the propane on the second try and worked great while camping the last few days. I still haven't decided if I'm gonna install a Hot Rodd kit or not,mostly depends on how fast I go through propane. 3 propane refills will buy a Hot Rodd kit
|
|
|
08-06-2011, 09:15 PM
|
#12
|
Senior Member
Join Date: Jun 2005
Posts: 393
|
Re: Water Heater questions
if your paying for the electric there would be no advantage to it, propane is cheaper per BTU.
__________________
Tim
|
|
|
08-06-2011, 10:23 PM
|
#13
|
Junior Member
Join Date: Jul 2011
Posts: 12
|
Re: Water Heater questions
thats good to know, I was thinking the electric would be less troublesome. I was pretty impressed with how well it worked/ease of operation, so I'll probably leave it as is.
|
|
|
08-07-2011, 03:55 PM
|
#14
|
Senior Member
Join Date: Jun 2005
Posts: 393
|
Re: Water Heater questions
You could just turn it off when not needed, that will save you propane too. It should heat up within a half hour or so. Propane should last quite awhile anyway, the water heater really doesn't use that much, at least not in the summer.
__________________
Tim
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|