Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-24-2017, 03:55 PM   #1
MBRENNAN
New Member
 
Join Date: Sep 2017
Posts: 1
Question Class C slide out problems

I have a 2007 GS Yellowstone Cruiser and the slide out binds at the top... the awning roller is binding against the top of the slide out, causing the top to stick as the bottom moves out... any fixes out there?
Michael
MBRENNAN is offline   Reply With Quote
Old 09-27-2017, 06:21 PM   #2
BadX
Member
 
Join Date: Sep 2015
Posts: 55
Default

Quote:
Originally Posted by MBRENNAN View Post
I have a 2007 GS Yellowstone Cruiser and the slide out binds at the top... the awning roller is binding against the top of the slide out, causing the top to stick as the bottom moves out... any fixes out there?
Michael

Experienced the same issue on our Super Nova. Eventually broke a arm and had to replace it which held up for about 6 months then ended up having to put a new complete slide topper on...damn RV's are expensive!
BadX is offline   Reply With Quote
Old 09-28-2017, 09:13 PM   #3
bhplumber
Member
 
Join Date: Mar 2017
Posts: 40
Default

My SN was doing the same thing. It turned out the set screws on the gear that drives the slide out on one side were loose. It looked like the topper was binding and holding the back of the slide in but was actually the front of the slide wasn't getting powered out. The rear was dragging it out cock eyed so the topper would bind on the rear at the top of the slide.
bhplumber is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 04:15 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.