|
01-01-2019, 10:35 PM
|
#1
|
New Member
Join Date: Feb 2018
Posts: 22
|
Onan 6500 Generator
I have had my gentertor pulled out and been using one on back of RV. I have talked to a few people and they all say you should get it fixed I just don't know where to get the work done, it's out and can drop off to be repaired or see what's wrong, but where, Tampa,FL Thank you in advance Happy New Year 🙌
|
|
|
01-02-2019, 07:35 AM
|
#2
|
Senior Member
Join Date: Apr 2018
Location: Nebraska
Posts: 557
|
Google; Generator repair
You will find a site that asks for your zip code. Should be quite a few in Tampa. Search their reviews to decide who is good and who is not.
|
|
|
01-13-2019, 11:57 AM
|
#3
|
New Member
Join Date: Nov 2006
Location: Arizona
Posts: 17
|
Our local Ford dealer works on our generator. Go to a Ford dealer with a truck center.
__________________
John
2001 GS 29' Cavalier Class C
|
|
|
01-13-2019, 02:47 PM
|
#4
|
Senior Member
Join Date: Aug 2017
Location: Memphis
Posts: 754
|
Many small engine shops?
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
|
|
|
01-13-2019, 06:02 PM
|
#5
|
New Member
Join Date: Apr 2018
Posts: 15
|
I went to a Cummins Engine dealer for Onam generator service.
|
|
|
01-17-2019, 09:35 PM
|
#6
|
New Member
Join Date: Feb 2018
Posts: 22
|
Thanks
I actually started looking at it myself and noticed that when I did the tune up meaning change in the plug in the filter gas filter I didn't know they had to spark plugs so now I'm going to replace the other plug actually two new ones and give it a start and if it runs well great then I'm going to test the voltage and go from there I see the voltage is right inside the Box so it shouldn't be hard to figure where it what goes to what how's the wires that were in there. Ripped out when I took it RV and body shop and they're having to fabricate some doors and a window that was shot out I took out a few doors and that takes the slide so I'll be getting it back in about 3 months or sooner it's a Bryan's and Lake Wales Florida they have a very good reputation just generator man gone can't wait to get that Onan 6500 back in 😎
|
|
|
01-18-2019, 05:35 AM
|
#7
|
Member
Join Date: Jul 2018
Location: Panama City Beach
Posts: 67
|
The local Florida Detroit Diesel shop repaired my Generac.
__________________
2006 Gulf Stream Crescendo 8356 First Timers!
|
|
|
02-26-2019, 10:02 PM
|
#8
|
New Member
Join Date: Feb 2018
Posts: 22
|
Like New
Well I took it to the Cummings dealer 1 day called and told me that 1 coil dead & something to do with the part that puts out the power , the good news 765.00 Running both A/C down the road 😎🙏
|
|
|
05-18-2019, 01:57 PM
|
#9
|
New Member
Join Date: Feb 2018
Posts: 22
|
Ok my friends I desperately need some help I've Gotten my Onan fixed my buy Cummings diesel now is when I need the help putting it back in not the install but the wiring I have two white wires one red wire one black wire and one green wire that goes in the pictures that I'm going to a post where do they go next I have the remote start I have a red green black and blue can I hook them up straight to the wire harness the end we got chewed up
Please help me
Thank you in advance 😎❤
|
|
|
05-21-2019, 01:17 PM
|
#10
|
New Member
Join Date: Feb 2018
Posts: 22
|
Okay since no one ever gave me any information I went straight to Cummings and got the wiring from them it's very easy the the green wire and the two white wires go to the bottom post you can see it if you look at it closely there's a bottom when after you see the 3 to go up and down and then your red and black go right there on your switch on your on off switch a producing power and I bought a remote start switch pigtail so now I'm ready to wired up tonight and get on the road I thought I would leave you this information since no one answered here is how you got connected 110 enjoy your day and God bless you and have fun adventures 😎🙏
|
|
|
05-22-2019, 07:59 AM
|
#11
|
Senior Member
Join Date: Apr 2018
Location: Nebraska
Posts: 557
|
Quote:
Originally Posted by FastEddie87
Okay since no one ever gave me any information I went straight to Cummings and got the wiring from them it's very easy the the green wire and the two white wires go to the bottom post you can see it if you look at it closely there's a bottom when after you see the 3 to go up and down and then your red and black go right there on your switch on your on off switch a producing power and I bought a remote start switch pigtail so now I'm ready to wired up tonight and get on the road I thought I would leave you this information since no one answered here is how you got connected 110 enjoy your day and God bless you and have fun adventures 😎🙏
|
Thanks for reporting back. I've been stuck before without any help. All you can do is ask and then post when you figure it out. If we all work together we will eventually have everything covered. Thanks for being part of the solution.
|
|
|
05-28-2019, 02:18 PM
|
#12
|
New Member
Join Date: Feb 2018
Posts: 22
|
Need Help wiring for remote start Gen
Hello I've gotten my 6500 Onan commercial fixed back in every wire hooked up except the remote start I have 5 wires one blue one white 1 black 1 green,red I know when you look at the pigtail 6 pins 2 wires 4 wires
Part BOO18S41N8 CUMMINGS ORAN 300 -4946
Pigtail. Help 🙏🙉
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -5. The time now is 04:45 PM.