Re: Bedroom slide cables
I was told the cables need to be straight. That means that if the brackets that the cables are attached to on the slide is even slightly out of a straight pull that as you travel the cable at that bend will vibrate. This vibration is similar to taking a single strand of wire and continuosly bend back and forth until it breaks. Is the break near the end? The end probably has a small mushroom like piece that is used to attach it. Mine broke right against that end. You can order new cables from the slide mec. manufacturer. If this is the case you can adjust the bracket up and down and use washers as spacers to shim the bracket until in alignment.
__________________
I've got a 50-50 chance to suceed, either I will or I won't, those are good odds aren't they?
|