Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-29-2015, 09:42 AM   #1
BadX
Member
 
Join Date: Sep 2015
Posts: 63
Default Diagnostic Trouble Codes

While trying to figure out this brake issue I was told about this and thought I would pass it along, now just have to find the information to translate the codes.

Diagnostic Trouble Codes

To display diagnostic codes, set the parking brake and turn the Ignition key "ON". Then press the Cruise "ON" switch and the Cruise "Resume" switch simultaneously for at least 3 seconds. If no faults are present, the cluster odometer will display "NO FAULT". If faults are present, the gauge cluster display will show each diagnostic trouble code for 5 seconds and then automatically scroll to the next entry and continue to cycle through the faults. To manually cycle through the fault list, press the cluster display selector button. The last character of the diagnostic trouble code will end in "A" for active faults or "P" for previously active faults. Turning the ignition key off will take the ESC and the gauge cluster out of the diagnostic mode.

After all repairs have been made, the diagnostic trouble codes may be cleared by putting the key switch in the accessory position, turning on the left turn signal and pressing the cruise "ON" and "SET" switches simultaneously for 3 seconds.
BadX is offline   Reply With Quote
Old 09-30-2015, 07:28 PM   #2
LabCab
Senior Member
 
Join Date: Oct 2009
Posts: 133
Default Re: Diagnostic Trouble Codes

THANK YOU!
__________________
Great Wife, 3 fine Labradors and a '08 Supernova ready to roam!
LabCab is offline   Reply With Quote
Old 10-01-2015, 08:02 PM   #3
LTC_R
Member
 
Join Date: May 2014
Posts: 66
Default Re: Diagnostic Trouble Codes

I can't remember the site, but read that this procedure will not reveal or reset your engine trouble codes. I have an engine fault, and it does not show in this process. I too, had brake issues and this did show and reset them. If you do find a site that has a listing for the IH Codes, please do share. Thanks.
__________________
Brian Redmon
LTC, USA, Retired
2008 GS6400, new to me 2014
2008 JK Unlimited toad
LTC_R is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trouble with ABS Controller. nailerman Class C 41 07-24-2022 01:15 PM
Gulfstream Coach Paint Codes Old Fat Guy Class A 1 03-15-2017 08:24 PM
Trouble Cranking Bridgettmclaughlin Class A 6 12-24-2015 09:43 AM
Paint color codes for touch up - 2007 Independence joanmarieee Class A 2 06-04-2014 10:17 AM
Paint codes Davida Class A 15 10-24-2006 08:30 PM

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 10:55 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×