Gulf Stream Owners RV Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-31-2016, 12:47 PM   #1
chhiii45
New Member
 
Join Date: Jul 2008
Posts: 13
Default Rear turn signal lamp replacement

My rear turn signal is burnt out but I cannot figure out how to get to the bulb! Any help is appreciated
chhiii45 is offline   Reply With Quote
Old 07-31-2016, 02:49 PM   #2
RayChez1
Senior Member
 
Join Date: Jun 2005
Posts: 1,027
Default Re: Rear turn signal lamp replacement

It might help if you could tell forum members what brand of coach you have, whether it is a Gulf Stream diesel pusher or a gasoline motor home.

I can only tell you that on my Gulf Stream Scenic Cruiser you lift the hood at the rear of the coach and at the ends of the rear cap their are some screw on type six inch covers. Kind of like the one that I have to unscrew to get the sewer hose in to make a connection. You unscrew that cover and you can get to the rear of the tail lights. Only one problem I found was that when my coach was manufactured in Nappanee, Indiana they went crazy spraying the liquid foam insulation. And yes it was sprayed all over the back of the tail light making it very hard to get to the light bulbs.

If it is a gasoline coach, I am not sure how those are put together.
__________________
2002 Gulf Stream Scenic Cruiser
2017 GMC Terrain SLE
Neway Freightliner chassis
Aventa II Blue Ox
RayChez1 is offline   Reply With Quote
Old 08-04-2016, 11:14 AM   #3
chhiii45
New Member
 
Join Date: Jul 2008
Posts: 13
Default Re: Rear turn signal lamp replacement

Sorry, my first post, I have a 2008 40 foot crescendo diesel pusher. It appears that the foam has been sprayed over the backs of the light assemblies.
chhiii45 is offline   Reply With Quote
Old 08-04-2016, 11:01 PM   #4
RayChez1
Senior Member
 
Join Date: Jun 2005
Posts: 1,027
Default Re: Rear turn signal lamp replacement

Yep! I believe that is the only way to remove the light bulb because I tried removing the screws from the outside and it would not come off. So I figured maybe you had to go through the rear and possibly unscrew the light bulb like on many automobiles. But I chose not to change my stop light bulb. So I still have only one stop light on my coach. It seemed awfully hard to remove that foam off the rear of the light assembly.
__________________
2002 Gulf Stream Scenic Cruiser
2017 GMC Terrain SLE
Neway Freightliner chassis
Aventa II Blue Ox
RayChez1 is offline   Reply With Quote
Old 06-03-2018, 12:57 PM   #5
chhiii45
New Member
 
Join Date: Jul 2008
Posts: 13
Default

My 08 crescendo tear turn signal lights are held in with a rubber seal
Remove the seal and the light assembly will come out

Not real easy but doable
chhiii45 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Turn Signal Inop/Rear Slide Seal pastordug Class A 0 12-20-2016 04:02 PM
replacement turn signal lenses family360 Class A 2 11-14-2015 08:04 PM
Rear Break/turn lights jchamberlain Class A 2 09-09-2011 07:47 PM
2004 Crescendo turn signal problem Don Canterbury Class A 1 11-15-2010 07:45 PM
Right Rear Stop & Turn signal bulb not working. darbyjudy Class A 6 08-12-2008 05:10 PM

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.