Fuse for the trailer connection

[jhan]

I have a hitch with 7 poll connector on my Tour Master. I don't have any power from the connector socket. Anyone has an idea where the fuse is located?

I found one that labeled something like 'Trailer Brake', but I think that's for the brake controller connector which is located behind the big black plastic cover in front of your left foot when sitting in the driver seat (it wasn't blown).
TIA.

[jhan]

Just in case someone else is looking for them, the trailer connection fuses are located next to the ECU for the engine on the rear passenger side. There are 2 square black boxes on each side of the ECU. One of them is for the trailer connection with 7 fuses and multiple relays.

[rdlamb]

Jhan:
I never would have figured that out. I added a US Gear Unified brake system for my Rubicon, and had to wire the controller. Freightliner made this very easy by leaving the wiring harness behind the panel you mentioned. I just hooked the controller up, and plugged the Jeep into the 7 wire connection at the hitch.
Didn't blow a fuse doing this, but had I, I never would have known where to look.
Thanks.