View Full Version : slide & jacks slow to operate

07-20-2010, 10:43 PM
My single slide & my leveling jcks are very slow to operate. Any suggestiong?

07-20-2010, 11:31 PM
Sounds like an electrical problem, not enough power to push the motors.

07-21-2010, 06:01 PM
Check your resevior oil level ensure it is properly filled with Jacks up and slides in. If full check you slide valves to ensure they are open fully. If not full add oil (not sure of the type for your unit, but it should be posted near the pump) and then try........... Jacks and 1 slide on my unit are hydraullic operated and one slide electric...... Let us know what you find out....

David Bott
07-23-2010, 09:18 PM
"Check your reservoir oil level"

And by that he meant the hydraulic fluid which is more or less transmission fluid. But yes, he is right, and that would be my first move. If it is low, then you also may care to look for a leek at end hose end as it is something that usually does not need to be really refilled.

Also guessing you do not have electric jacks.