PDA

View Full Version : Slide outs don't work


jhiggy
05-26-2011, 10:45 AM
I have a Super Max with a bedroom slide and a living room slide. There is no power to either. I have checked all fuses and breakers, and the unit is plugged into 115v. What am I missing? Any ideas?

Thanks, Jan

bbrown
05-26-2011, 06:42 PM
does your key have to be on?

Frosty
05-30-2011, 04:52 PM
Some rigs require the parking brkae to be applied before slids will operate. It's a safety interlock.

Billynchrisnpa
05-31-2011, 10:24 PM
I know my SuperNova needs to have the ignition key on to open the slides..........

RayChez1
06-01-2011, 10:15 PM
I have a class A and the drivers seat has to be all the way forward before the slides work.
Again not sure on the class C, but on my class A there is like a circuit breaker in the compartment where you have the big toggle switches for winterizing or just dry storage. The circuit breaker is a rectangular shaped with a lever type handle to reset it. If the red button is out, it has been tripped. That circuit breaker controls the slides and the levelers. Again, not sure on a class C, but worth checking.

RLP1945
06-12-2011, 10:03 AM
I had that happen at the dealer when I bought a 2004 Gulf Stream and the tech said it was a "relay" that went out. It only took a few minutes for him to check and change. He said it had shorted out because there was water in the compartment where the motor was. Maybe that will help to check!

nwcanopies
06-19-2011, 07:56 AM
We also have a Super Max 2010. We need to have the Ebrake on. Thats it. Doesn't need to be level, but it should. Seat doesn't need to be forward for ours.