Slide sticking and general slide use

[Hotdogwater]

Have a 05 GS 37' endura on the c5500 chassis. My main slide will stick on one side when retacting and sometimes requires me to extend it first.

Questions/topics:
1. Do the flush slides sink down into a track or something that needs to be greased?
2. Any good sites or instructions on how to adjust a slide
3. Have small spider crack on one corner of small side, is that from alignment or adjustment?
4. Notes or hints on opening or retracting to proper place for open and traveling/storage.

Thanks,
Daryl

[LabCab]

Daryl: First of all make sure you are on a level surface and/or have the stabilizers down so you are level.
You do need to grease the tracks so they move easily.
I'd call Gulfstream (people bad mouth them, but the've always been super helpful with my questions)
Tell them what type of unit and VIN and ask to get a copy of the operation manual. They've emailed me copies in PDF format. (Slides and Levelers). Once you have the info you'll be set. If all else fails ask at a RV dealer. Good Luck!