PDA

View Full Version : Updating TVs and satellites


BadX
09-10-2015, 02:00 AM
Has anybody updated their TV on the SN? The one over the cab is really small and the one in the bed room is LCD so if you are not looking at it straight the picture looks funky. I know a 32" LED will fit in the bed room with no problem and was thinking about adding a locking swivel arm to the mount for the one over the cab so it can swing out more. The 32" LED TV's only weigh around 6 pounds so weight is not an issue with them and a 40" weighs around 24 pounds, would love to put that over the cab but I haven't measured yet to see if it would fit.

Next question, DirectTV, anybody using it on their coach? Pros and cons?

LabCab
09-10-2015, 08:52 PM
Be careful with that front TV. There are incidents mentioned on this forum of the damn thins coming lose and flying around.
Not sure if this matters, but the TV's are also set up for 12 volt so take that into consideration.

BadX
09-18-2015, 07:58 AM
, but the TV's are also set up for 12 volt so take that into consideration.

The front TV in ours has a 110 to 12 volt regulator built into the plug to the TV(whats up with that?)but the bedroom TV is 110. Both receptacles are 110.

BadX
10-08-2015, 01:21 AM
Installed the new TV's, got 2 Samsung 32" and wish I would have went with a 40" up front but I was worried about clearance but still a huge improvement over the small 18" LCD that was in there from the factory. I'll post some pictures when I get the slides back out.

BadX
10-09-2015, 09:56 AM
These are so much nicer than the LCD TV's that came from the factory.

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xta1/t31.0-8/12068995_10205148780821624_196331160242817523_o.jp g

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpt1/t31.0-8/12138505_10205148781741647_1065780201927410698_o.j pg

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xap1/t31.0-8/12094791_10205148782341662_836192032594026663_o.jp g