PDA

View Full Version : Location of Oil pressure sensor on MBE 926???


Burkejonathan
11-03-2015, 07:29 PM
Hey guys.

I have an 07' T-40 B Tour Master with an MBE 926 engine. Freightliner system LCD says no oil pressure and sounds alarm, it came back on briefly then dead (the oil pressure gauge), then warning system says to shut off the engine. Engine is running fine, so most likely the oil pressure sensor per Freightliner, so I got a new one sent, but where is it on the engine?

I think it is on the drivers side but where exactly? We're dead in the water far from home until I can get the sensor installed.

Any pics with an arrow showing where it is, if available, will be greatly appreciated.

Many thanks,

Jonathan

2007 T-40B Tourmaster
24'x6' Box Cargo Trailer
2003 Chevy Suburban Chase Car

Chuck v
11-03-2015, 09:11 PM
On the right side of the engine -- see the illustrations on this web site:
http://www.manualslib.com/manual/739115/Detroit-Diesel-Epa04-Mbe-900.html?page=37#manual

Chuck

Burkejonathan
11-04-2015, 12:00 AM
Thank you, i'll post the results tomorrow!

jonathan

Burkejonathan
11-06-2015, 11:00 PM
Installed the new oil pressure sensor and it solved the problem! :)

They do not make it easy to get to near the alternator, sheesh!

We have a Tourmaster group on Facebook now, full of good info and tips:

https://www.facebook.com/groups/423524024415896/

Jonathan

Chuck v
11-07-2015, 10:08 AM
Glad to hear you got it installed, and yes there is not much room around the engine there...