Crescendo manufacturer tire pressure

[Silent Thunder]

I have a 2004 36' Crescendo M154 265/ 75R 22.5. Just put new TOYO tires on the rig after having Michelin's. Coming home from the tire store at 70MPH on the highway it seemed like the back end of the rig was floating. I can not find where the manufacturer's inflation sticker is or if someone removed it since I have only had the rig for several months. Any one own one that can provide me the proper inflation amounts. I see most recommend considerably less pressure on the rear duallys.

[Vanman]

There is usually a tag with all that info right around your head where you sit to drive. It may be covered with curtains or in a cabinet. Look around that area.

[Frutza]

The vin tag says 110psi all! If you have scale weights you can inflate accordingly, I run 110 psi rears & 90 front and I have 154's also and 36' Cresendo

[Sudsy]

I run 100 up front and 95 in the rear.


Sumitomo ST718 245/75R22.5



Sudsy

[Gingersdad]

I have a 2004 36' Crescendo M154 265/ 75R 22.5. Just put new TOYO tires on the rig after having Michelin's. Coming home from the tire store at 70MPH on the highway it seemed like the back end of the rig was floating. I can not find where the manufacturer's inflation sticker is or if someone removed it since I have only had the rig for several months. Any one own one that can provide me the proper inflation amounts. I see most recommend considerably less pressure on the rear duallys.

I recently purchased tires from DT. My old ones were at 65lbs as the mfg sticker had attached to rig. The new tires were inflated to 80lbs. When I questioned the tech at DT, he said you should always inflate the tire to the pressure of the tire mfg, not what is posted on the rig.

[Restorium]

I fill them to what the tire says on the sidewall.