How to re-align slideout

[Mike1931]

I looking for help with adjusting my (2004 Gulfstream Endura 6340) living room slide. It is real tight on the front edge and won't seal, it falls 3/4 inch short from touching the body of the coach. I have lubed it in several areas, and have checked for any debris that might have kept it from closing. I have looked thru my owners manuals looking for the brand of the hydraulic slide system (found nothing indacating brand) One would think, there has to be some type of adjustments

Anyone have any current or past experience with the single hydraulic ram systems. any help (brand, or adjustment hints) will be welcomed.

Mike
2004 Gulfstream Endura 6340
Tulaip Washington

[bmojmhs]

I have a 2005 UltraSupreme with an Equalizer hydraulic system. I have attached a copy of the service manual for adjusting the slide out to give you a feel for what is involved. I'm sure other makes will be the similar.

[TimS]

Have a situation on my 2008 Independence where one of the slides won't stay closed completely. It will fully close, but after a few days of sitting in the storage lot, I notice the the slide has come out about 2-3 inches. Has been an intermittent problem over the past few months.

[bmojmhs]

Could be a leaking check valve in the hydraulic system.

On the service info doc I posted it mentions jacks bleed down when stowed. One item was to replace the pump valves. This could be what is happening with your slide out.

[TimS]

Thank you. I will check it out.