PDA

View Full Version : how to make the table into bed


roadwoman
02-29-2020, 06:40 PM
2006 Gulf Stream GTouring 5291. I put the table onto the shelf holder on seat. Then lowered the seat onto edge of table. But there's the space in between that I can't figure out. Am I missing a cushion that goes into that space.

Frutza
02-29-2020, 07:14 PM
You did make the seat backs I to the bed? Then look under the bed

roadwoman
03-01-2020, 10:05 AM
Nothing under my bed but a water tank. The seat back is to small for 1 and 2 seat backs to large. I found a double pillow type thing but way to small. I am puzzled as to what belongs in this space.

Colorado350
03-01-2020, 11:30 AM
Nothing under my bed but a water tank. The seat back is to small for 1 and 2 seat backs to large. I found a double pillow type thing but way to small. I am puzzled as to what belongs in this space.

If you turn them perpendicular do they fit tightly?

roadwoman
03-02-2020, 09:25 AM
The two ends are the seats for the dinette and they are staionary. The seat backs do not fit going the other way. Too long.

givemeaboost
03-07-2020, 03:40 PM
My Palm Breeze has the same problem but not that bad. I have to squeeze the fourth cushion pretty good to get it in there.


Ken..........

CAP
03-08-2020, 11:26 AM
I have the exact same rig. Ya gotta squish both seat backs into that table space.
It's not easy....good luck

purduepete12
03-08-2020, 11:34 AM
I bought my 2007 BT 5291B new and it came with a set of small cushions that fit in this space. Check with GulfStream for a part # and they should be able to sell you a new set if you have lost yours.

CAP
03-08-2020, 11:38 AM
WOW.....I bought mine brand new and never saw or had any smaller cushions. Who knew?

Graygal
03-08-2020, 05:35 PM
Our 5291 has two pads. We store behind the bedroom TV. They fit in that gap, not the seat backs.

Graygal
03-08-2020, 05:36 PM
There should be two of those pads. Like the one in your second pic.

purduepete12
03-08-2020, 06:15 PM
Yes, we also received two sets of these cushions to fit over the table.

roadwoman
03-08-2020, 06:29 PM
Do you happen to have what the cushions are called or a model number. Maybe I can find them somewhere to buy. I only have one set of pillow when I bought this unit used.

roadwoman
03-08-2020, 06:29 PM
Do you happen to have what the cushions are called or a model number. Maybe I can find them somewhere to buy. I only have one set of pillow when I bought this unit used.

purduepete12
03-08-2020, 06:49 PM
No, I am sorry but, I don't have a part # and just refer to them as the table cushions.
Perhaps if you called the parts dept at GulfStream they could provide you with the proper part # and a price as they still make the BT Cruiser model 5291B.

roadwoman
03-08-2020, 07:42 PM
Thanks Tried that but now the beds make up from the back cushions of the dinette. Looks like I will try to find foam and make my own. Thanks for the input.

roadwoman
03-08-2020, 07:44 PM
Do you happen to have what the cushions are called or a model number. Maybe I can find them somewhere to buy. I only have one set of pillow when I bought this unit used.

Graygal
03-08-2020, 08:19 PM
Cant get to my camper at the moment,but I’ll see if they have tags on when I can.