New member

[krswolf]

Hi, I'm Kate, and I'm from Iowa! Glad to find this forum!
I have a 1995 Gulfstream Conquest, Class C.
I have a problem, trying to get on the road this spring.
I had to purchase a new sewer hose, but my bumper is 1/4 inch too small! I can barely get the hose in and out, and am afraid I will tear the hose pulling it out. Same problem with the end caps.
Any ideas on finding a smaller diameter hose and end cap that will fit my old bumper?
Thanks! Kate

[atreis]

You're very unlikely to find a narrower diameter sewer hose. The simplest solution may be use a 4" PVC pipe and put screw on caps on the ends and mount it behind or under the bumper (or somewhere else - whatever works) and store the hose in that.

[krswolf]

Thanks for the idea! I will look into that. Kate

[jamesham]

See previous message above about using a plastic fence post.

Hi, I'm Kate, and I'm from Iowa! Glad to find this forum!
I have a 1995 Gulfstream Conquest, Class C.
I have a problem, trying to get on the road this spring.
I had to purchase a new sewer hose, but my bumper is 1/4 inch too small! I can barely get the hose in and out, and am afraid I will tear the hose pulling it out. Same problem with the end caps.
Any ideas on finding a smaller diameter hose and end cap that will fit my old bumper?
Thanks! Kate