PDA

View Full Version : Interior Lighting

MAJWayne88
08-11-2021, 02:40 PM
Guys, I just did a fairly extensive renovation of my 2007 GS Yellowstone and my wife wants to replace the "standard" double light over the dinette with a pendant light. I have the 12v pendant light she wants, but there is no switch with it. Any ideas on how to add one?
Dennis4809
08-22-2021, 01:47 PM
Find a push button switch, drill a hole in the base and install the switch. Could probably use the switch form the fixture you’re removing.
MAJWayne88
08-22-2021, 03:29 PM
Find a push button switch, drill a hole in the base and install the switch. Could probably use the switch form the fixture you’re removing.

I did just that! Found a switch, cut a slot, wired it up, blew a fuse, tried again, and viola! Works like a champ! Thanks.
Chuck v
08-22-2021, 05:38 PM
Nice Wayne...


When I first got my Tourmaster, I modified its dining fixture to allow a 'candlelight' mode where the three bulbs worked in series to give a nice subdued lighting. Heee is what it needed in terms of switch wiring:

https://www.gsowners.com/attachments/photobucket/img_9269_59254f0508caa6401d6e164fe081b252.jpg
Chuck v
08-22-2021, 05:42 PM
...forgot to post the wiring diagram.


https://www.gsowners.com/attachments/photobucket/img_9297_081a7fa497f62b8069eff1f8c2945537.jpg


Chuck