View Single Post
Old 06-30-2008, 07:02 PM   #18
Curt Krueger
Member
 
Join Date: Aug 2007
Location: Modesto
Posts: 50
Default Wiring at hitch connector

David and RJ

I am reading the latest post, about the mileage being added during towing. I have the 2000 Blazer which I tow behind a Crescendo, but mine does not add miles. I am curious how you have your Blazer set up to tow. Mine has the electronic trans, I just push the two buttons and hold until it goes into neutral and I am good to go. I do have to remove a fuse to eliminate the idot lights on the dash.Never racked up any miles.

Regarding the brake buddy, this is the unit I use also. At first I played with the settings and finally found where it wanted to be. Mine is about 5 years old now. I do have to watch the length of the stroke on the pedal as it will keep the tail lights on if it is too short. I think you have to the sweet spot for your particular driving style. I do not want this to come on unless I brake hard enough to energize the pendulum. This is done with the sensesitivity setting.


Curt
__________________
2005 Crescendo triple, 2000 Blazer toad, Brake Buddy,DW,2 cats and lots of patience
Curt Krueger is offline   Reply With Quote