BT Cruiser 5291 water level
We had a similar problem with our - Our repair guy saw that the vent was no straight and this caused water to get in and not let the air out - also, our fill hose was about 2/3rds up the tank.
Check where the pump gets it's water - it is probably about 2 inches of the bottom, so you will never get all of the water out with the pump.
Anyyway, our guy put a pressure fitting in place of the gravity fill port and put the input to the tank directly on top of the tank - He then added a vent line from the top so I do not over pressurize the tank.
Hope this helps
|