The GEN Provides 120vac to the CONVERTER which supplies 12vdc to the POWER CENTER FUSES. You can check Converter output at both sides of the TWO 30a (main) fuses at Fuse Panel; (if battery was installed reversed polarity, it blows these fuses.) One= Between Fuse Panel and Converter; One= Between Fuse Panel/ Battery. You may have one/ both blown, or maybe other issues, (loose wires, GEN problems, etc.? There are also MAIN BREAKERS (one or two, depending on GEN size) on the GEN itself, (near/ behind the on-GEN START switch on most). Good Luck
__________________
THenne1713
2000 Conquest LE 6266, Class-C on 99-E450SD, 6.8, 2v, V-10
|