Bike Dr. Thank you for your suggestions. Just a little background.
This is a 2021 5210 BT. On the first day when I turned on the HW tank at the switch it only heated for 1minute and 20 seconds and then tripped the breaker. I let it cool and reset the breaker, however 1 minute and 29 seconds later, the same thing. Now it will heat for about 7 minutes and then the breaker trips again. Breaker is not hot.
Could there be a High limit switch in the tank that senses the water and after 8 minutes it trips the breaker? Oh well, the gas works perfectly well so I will stay with gas.
I have a spare 20 amp breaker in the panel. I will switch the HW water feeder wire down to the 20 amp and see if it still trips the 20 amp breaker.
Thanks again for your comments.
|