View Single Post
Old 01-29-2023, 07:17 PM   #5
RY469
Senior Member
 
Join Date: Apr 2021
Posts: 279
Default

You can pull the fuel line off and push start switch to the off position to see if the fuel pumps properly (into an appropriate container). This will tell you if the fuel pump is an issue. At that point see if the fuel cutoff solenoid (bottom of the carburetor) has 12vdc to turn it on. The oil pressure sensor switch mentioned earlier is also an issue, should be in closed (making contact, continuity) position, this is tied into the aforementioned fuel cutoff solenoid. Maybe not an electrical issue after this point if all well with these things.
RY469 is offline   Reply With Quote