Quote:
Originally Posted by THenne1713
OK, (Terminology) a LATCHING SOLENOID only requires momentary power to turn ON/OFF, but OFF is reverse polarity from ON, controlled by the ROCKER SWITCH. A STANDARD SOLENOID requires coil voltage, or solenoid turns OFF. Suspicion is bad rocker switch, or low/ marginal battery? Hope this helps?
|
Thank you for your explanation. I am assuming that these Battery Disconnect solenoids are LATCHING SOLENOIDs. My understanding is that the battery side needs at least 10.5 volts for the switch to open. As indicated in my other response, I don't have any voltage to either side of the chassis solenoid and in fact the battery pole has continuity to the frame. I did replace the chassis solenoid, but it didn't change anything.