Hmmm, this sounds like a nasty problem. There have been many reports that the floor and tank "plug" fall inside the tank during factory install of the toilet. Do the assemblers say "oh well"? -apparently.
I think you should root & scratch around with your snake or long stiff, hooked wire thru the toilet, in the direction of the tank drain, with the valve open into a sewer dump - if it starts coming out, may God help you if you are in the way or no hose attached!
confirm the model (Cresendo) & floor plan (8406) of your unit so I can check this evening to see if I have any specifics how it is plumbed.
You really don't want to stick anything up the outlet just in case you're successful. Plumber do have devices that perhaps could attach to the outlet, then pull the blade to open, blow in water or air, close the blade, remove the pressure device, attach your sewer line, pull the blade open again & listen for the sweet sound of running water!
Keep us posted on what works...
|